MyPower S2300-28TC-AC Switch Installation Manual
Maipu Confidential & Proprietary Information
Page 23 of 30
collision. The heavier or higher device should be operated with two people.
Step 4: Push in the device simultaneously and cling the cabinet tray to the
cabinet upright.
Step 5: Use the fixed screwdriver to install the device to the cabinet upright, as
shown in Figure 3-4.
F
I G U R E
3 -4
D
I A G R A M O F I N S T A L L I N G T H E D E V I C E T O T H E C A B I N E T
Step 6: Check whether the device is installed fixedly and horizontally.
Step 7: Check the space between the installed devices. Choose the proper
cabinet blank panel (standard accessory for chassis) and place it at the space
between devices. Use the screwdriver to fix the blank panel on the chassis.
Installation suggestions:
When several devices need to be installed on the same cabinet, without affecting
the overall wiring and deployment, it is recommended to install the heaviest device
to the bottom or near the bottom of the cabinet. The purpose is to reduce the center
of cabinet gravity and enhance the stability.
When installing the device to the cabinet, to ensure the heat dissipation, it is
recommended to reserve 1U space between devices. Install the blank panel
configured for the cabinet at the space between devices.
