MyPower S2300-28TC-AC Switch Installation Manual
Maipu Confidential & Proprietary Information
Page 14 of 30
2
Installation Preparations
2.1 Security Suggestions
To avoid device damage and bodily injury caused by accident, please follow the
following precautions:
Keep the switch free from damp and heat.
Ground the switch properly.
Please wear the ESD wrist strap during the installation and
maintenance and ensure the well contact of the ESD wrist strap and skin.
Do not install, move and disassemble the switch and module with
powering on to avoid human injury and device damage.
Do not plug/unplug the switch interface module and interface card
with powering on.
Please connect the interface cable of the switch correctly. Especially,
do not connect the telephone wire (including the ISDN wire) to the serial
port.
Pay attention to the laser safety. Do not expose the eyes to the light
emission port of the laser or the connected fiber connector directly.
Before cleaning the switch, pull out the plug of switch. Do not wipe it
with wet cloth and liquid.
Do not locate switch near water or humid place, and prevent water and
humidity entering switch shell.
