Router Installation
MP1900X Series Router Installation Manual
3-6
copyright
2019 Maipu, all rights reserved
section.
Besides the slide, a tray also can be used to support the router. The installation
process of the slide is the same as that of the tray. Therefore, the tray installation
process is omitted in this installation manual.
Ensure that the distance between the slid to the bottom cabinet is 2U and three
holes on the square hole bar is 1U, as shown in Figure 3-1.
Figure 3-1 The minimum slide height
The following describes how to install a slide to the 19-inch standard cabinet.
The installation steps of the slide are as follows:
Step 1: Ensure the installation position of the slide on the cabinet and mark the installation hole
position using a marker.
The space height above the slide must be larger than the to-be-installed router chassis
height and enough margin is reserved (1U margin is recommended).
To ensure the stability of the cabinet, try to place a heavy and high router below the