3
Kleiss MCS120-24 System Manual v.1.1 March 2021
|
www.MainlineControlSystems.com
2.3 Stopping Tool Kit Specifications
2.3 Stopping Tool Kit Specifications
A) Maximum operating pressure of 120 psi (see NOTE in 2.1C)
B) Weights
a) Stopping tool ~ 29 lbs.
b) Ball valve ~ 8 lbs.
c) Shipping weight in case ~ 59 lbs.
C) Dimensions
a) Stopping tool height with stopper rod completely extended ~ 4’ 8”
b) Stopping tool height with stopper set ~ 3 feet
c) Storage case ~ 38” length x 18” width x 6” height
D) By-pass / vent port
a) 3/4” tap size in tool
b) 1” camlock male coupling
2.4 MDS Inflatable Stopper Specifications
2.4 MDS Inflatable Stopper Specifications
A) Sizes
a) 2” Pipe ID [Part #23100375]
b) 2.5” Pipe ID [Part #23100376]
c) 3” Pipe ID [Part #23100380]
d) 4” Pipe ID [Part #23100385]
B) Inflation pressure of 175 psi or 2x system pressure if unable to achieve 175 psi by compressor or nitrogen
C) Design burst pressure of 525 psi
D) Operating temperature range of 5° F (- 15° C) to 140° F (60° C)
E) Maximum temperature range of 158° F (70° C) for up to 30 minutes
2.5 Vent Stack Specifications
2.5 Vent Stack Specifications
A) Height assembled ~ 112”
B) 1” camlock male coupling
C) Air hose to venturi connection
D) Hose (standard) of 10 m, 1” camlock connection F x F
E) Ground rod included
F) Weight (less hose) ~ 27 lbs.
G) Air supply and flow capacity rates =
Air Supply
Flow Capacity
Working Pressure
(PSI)
Air Consumption
(ft
3
/min)
Blow Out Volume
(ft
3
/hr)
80
13
24300
120
13
21200
