41. The connecting rod side play shall
be .019 - .020 inch when new.
A
feeler gauge may replace the dial
indicator.
The thickness of the
big end of the connecting rod when
new is .665 to .670 inch.
It
is permissable
to have more than
.020 if the connecting rod has
worn into the flywheel surface.
42.
The reference distance across the
flywheels is 2.475 - 2.490 inches.
This dimension should be used as
a reference only as the measure-
ment of the side clearance of the
rod is the only accurate method.
43. Remove shifting fork spindle by
hand.
Check to see that it is
not bent.
44. Remove gear stack - by hand.
Note the shims.
Some trans-
missions do not have shims.
The shims control the 1st.
gear tolerance to
o.
3mm
(.012).
If the transmission
is improperly shimmed it is
possible to engage two gears
at once.
www.maicowerk.com
Courtesy of [email protected]
Square Barrel Engine Manual Service Manual
