Operation Manual PILOT TEST
8504660
Rev.
3
30
06/11/2019
Table 12 Audiometry menu
ITEM
EXPLANATION
Display type
Results are displayed with:
•
Graph:
The level and frequency of the response is highlighted by a
red
O
for the right ear and blue
X
for the left ear. The results are
connected by lines when octave frequencies are tested (Figure 21).
Figure 21
•
Table:
The response in the table view is stored as a numerical value
under the frequency and ear tested (Figure 22).
Figure 22
Test mode
Selection of the operation mode:
•
Presenter
: Tone is presented when the
Tone
key is
touched.
•
Interrupter
: Tone is interrupted/stopped when the
Tone
key is touched.
Frequency
change after
saving
When
On
, the next frequency is selected upon storing the result. If
this function is switched
Off
, the next frequency must be selected
by pressing the
arrow
keys.
Level after
frequency
change
Change to hearing level when frequency is changed.
•
Remain:
The hearing level does not change with the frequency change.
•
Return to minimal level:
The hearing level at the next frequency is -10 dB.
•
Decrease by 30 dB:
The hearing level at the next frequency
is decreased by 30 dB.
•
Return to 30 dB:
The hearing level at the next frequency is 30 dB.
NOTE
: This setting also defines the start level with a new test.
Remain
and
Return to 30 dB
start level is 30 dB HL.
Return to minimal level
and
Decrease by 30 dB
start level is -10 dB HL.
Summary of Contents for PILOT TEST
Page 1: ...Operation Manual PILOT TEST...
Page 2: ......
