Operation Manual PILOT TEST
8504660
Rev.
3
19
06/11/2019
understands, ask the child to identify the pictures in the same manner as the screening
test, i.e.,
“Point to the toothbrush; show me the airplane, etc.”.
Do not start the
test until you are confident that the child understands and knows the pictures.
The test can be less intimidating if the child is to pretend that he/she is going to play
the “
Pilot Game
”. This will reduce the anxiety associated with screening. Tell the child
that when the test starts, the pilot needs his/her help and will ask them some questions.
Introduce the headphones and explain that they are needed to help the pilot; he/she
must put on the headphones
– just like pilots wear – so that they can hear each other.
Make this instruction fun and entertaining for the child.
Explain that the pilot will ask where a picture is and he/she should point to it on the
picture board. The child should be told that the voice will start out loud and get softer,
so he/she must listen very carefully.
The child should sit in a way that the screen of the device is not visible. Place the
board in front of the child for pictures to be selected. Place the headphones on: red
side on the right ear, blue side on the left ear and make sure that they are secure.
Adjust the headband of the headphones so that the transducers are at the correct
angle (i.e. the sound output grid exactly facing the ear canal). The headphones needs
to fit snuggly (make sure the child’s hair and/or glasses are away from the ear).
Put the monitor phone on your ear to hear the presentation of the word during the test.
You are ready to begin!
5.2.4 PILOT TEST Process
Figure 6
Figure 6 shows the PILOT TEST display. See
Section 5.2.2 for more information.
The PILOT TEST process is described below.
1. Press the
L/R
key, located in the butterfly.
R
(Right) or
L
(Left) will display on
the screen.
B
(Binaural) is selectable if
Binaural presentation
is activated in the PILOT TEST
menu (see Sections 5.2.6 and 5.5.3)
2. Press the
Group
key in the left cloud to change the test group. There are
four test groups to select. The
Group
that is selected is displayed on the screen
as well as indicated by the green LED located on the airplane.
3. Press the
Start/Stop
key in the ball, to start the test. Once started, "
Test
Running
" shows on the display.
4. The Group selected will start with a quick instruction sentence
“Let’s look at the
pictures” and hand displayed on the screen.
Summary of Contents for PILOT TEST
Page 1: ...Operation Manual PILOT TEST...
Page 2: ......
