21
Optional Accessories
EAS 2426 Universal Stand
(cont’d)
1. Mount the Pocket Surf unit in the
bracket on the Stand using the captive
screw in the base of the bracket. The
screw mates with the tapped hole in
the bottom of the Pocket Surf housing.
Tighten the screw using a screwdriver
or coin; do not overtighten.
2. Using the appropriate controls,
adjust the setup so that the base of the
PocketSurf bracket (and the bottom of
the Pocket Surf housing) is parallel to the
surface to be measured and the probe
skid and stylus are barely in contact with
surface. Use the Fine Adjustment to make
the black, scribed Reference Line on the
Probe Mounting Block parallel to the
bottom of the Pocket Surf housing (as
outlined in the
Gage Operation
section).
3. Once the setup is correctly adjusted, and
the probe is properly positioned on the
workpiece surface, gently press and
release the “Start” button on the Pocket
Surf unit to make the measurement.
EAS-2567 Column Clamp
& Bracket
The EAS-2567 Column Clamp &
Bracket is the same Column
Clamp and Bracket assembly
furnished with the EAS-2426
Universal Stand, and can be used
on any height stand or comparator
stand having a 1¼"/32mm
diameter column.
Follow the same setup/adjustment
instructions as for the EAS-2426
Universal Stand.
Do not place the probe in the “closed”
position with the Pocket Surf mounted
on the EAS-2426 Universal Stand.
Damage to the probe stylus will result.
