Mahr MarSurf M 300 Operating Instructions Manual Download Page 7 | Manualshive

Page: 7 / 72

Mahr MarSurf M 300 Operating Instructions Manual Download Page 7

Mahr GmbH, MarSurf M 300 and RD 18

3

11. Only Mahrtrained personnel are permitted to carry out work on this instrument

and its components. Protective covers must only be removed by trained techni
cians and only when servicing is required. Any procedures carried out on this
instrument that go beyond those tasks described in the operating instructions
will void the equipment warranty. Mahr GmbH declines all liability for damage
caused by unauthorized procedures.

12. Do not use fluids on or near the instrument and its components.

13. Do not use cleaning materials which contain harmful substances. Do not use

solvents.

14. Inspect the connecting cables at regular intervals and check for damage. Change

damaged cables immediately (Mahr service personnel).

For the MarSurf M 300 and RD 18, Bluetooth technology has as yet

been approved in Europe and North America only! Approval in further

countries is in progress. In case of doubt please contact your Mahr

partner!

«
...
5
6
7
8
9
...
»

Summary of Contents for MarSurf M 300









































































Reviews:

No comments