Mahr MarSurf M 300, Operating Instructions Manual, Page: 17 / 72

Mahr GmbH, MarSurf M 300 and RD 18 13
28
30
29
9 V =
CTRL 0 I
+ –
Fig. 5
MarSurf RD 18 connections
28 CTRL Connection
9
for the MarSurf
M 300 meas uring instrument
29 0 / I Reset switch
"0": As supplied (power supply
disconnected),
"I": Operating status
30 9 V = Connection for AC adapter
The cable with two mini-plugs can be used to
create a cable connection between the MarSurf
M 300 (connection "DRIVE",
10 ) and the MarSurf
RD 18 (connection "CTRL", 28 ).
If there is no cable connection, the MarSurf
M 300, attempts to create a Bluetooth connec­
tion with the most recently selected MarSurf
RD 18 drive unit.
The USB cable (with a mini­USB plug and a
USB plug) can be used to connect the MarSurf
M 300 (USB interface ,
11 ) with the USB inter­
face of a PC.
For mobile use, the shoulder belt can be at­
tached through the eyes (16) in the MarSurf
M 300.
The MarSurf M 300 and the MarSurf RD 18
along with the standard accessories can be car­
ried around easily in the
transport case .
9 instead of the Bluetooth connection