71
Mahr GmbH • Millimar C1202
The display shows information on
how to position the probe at C1 for
the second measuring point.
–
Use the
4
key to confirm or
Ó
to
cancel the process.
Then go through the same process
for the probe at C2.
–
Use the
4
key to confirm or
Ó
to
cancel the process.
–
Following successful measurement,
press
4
to activate the customer
calibration or
Ó
to cancel the
process.
An error message appears if the
measured values of the customer
calibration are not plausible.
– Use
4
to repeat the customer
calibration or
Ó
to cancel the
process.
