Mahlkonig K30 ES Operating Instructions Manual Download Page 21

Page: 21 / 24

12. Certifi cate

13. Warranty Conditions

1. The warranty period is 1 year from the date of purchase.

2. The warranty covers all damages that can be attributed to infe-

rior materials or defective workmanship. Corresponding grinders

will be repaired or replaced free-of-charge, with the exception of

transport or freight charges. Transport is the responsibility of the

customer. Therefore, avoid damages with all returns by correct

packing.

3. The grinder may only be opened for cleaning purposes in ac-

cordance with the Operating Instructions.

4. This warranty does not cover damages which have occurred

through: Improper usage, improper maintenance, lack of ser-

vicing, usage for purposes other than those intended, incorrect

installation, incorrect voltage, breakage, natural wear or for rea-

sons beyond our sphere of infl uence.

5. In order to maintain the warranty, only original spare parts and

accessory parts may be used.

6. Observe in addition our General Delivery Conditions in their

respective current version.

7. The manufacturer is in no way liable for consecutive or second-

ary damages.

8. The warranty does not cover costs resulting from repairs con-

ducted by non-authorized personnel.

EC Declaration Conformity

As defi ned by EMC-directive 89/392/EWG

Name of the manufacturer or in the EU residential authorized person:

HEMRO AG

Address of the manufacturer or the authorized person:

Bramenstrasse 11, CH-8184 Bachenbülach

announce, that the machine below

product type:

commercial device for food processing

machine description:

Coffee grinder

machine typ:

K30 ES, K30 Vario

is in compliance with the conditions of the Directive of Machines 98/37/EG and with

the main standards stipulated in the Directive concerning low tension 73/23/EWG and

applies to the national laws that transpose it.

Issued in Bachenbülach:

01.01.2008

Function of subscriber:

Managing Director

Name of subscriber:

Nils Erichsen

Signature

MAHLKÖNIG GmbH & Co. KG, Amtsgericht Hamburg HR A 85 074; Persönlich haftende Gesellschafterin:

Beteiligungsgesellschaft MAHLKÖNIG mbH, Eingetragen Amtsgericht Hamburg HR B 45 324, Geschäftsführer: Nils Erichsen

Dresdner Bank AG (BLZ 200 800 00) Kto. 383 780 400, Postbank Hamburg (BLZ 200 100 20) Kto. 253 89-203

Commerzbank AG (BLZ 200 400 00) Kto. 21 10 294, Ust. Id. Nr.: DE 118 37 22 65

MAHLKÖNIG GmbH&Co.KG

Tilsiter Straße 142, 22047 Hamburg

Telefon : 040 - 69 69 40 - 0

Telefax : 040 - 69 39 721

G A S T R O N O M I E M Ü H L E N | H O R E C A G R I N D E R

Summary of Contents for K30 ES

























Search results

Summary of Contents for K30 ES

Reviews:

Related manuals for K30 ES

Brands by name

Popular brands

Mahlkonig K30 ES, Operating Instructions Manual

Search results

Summary of Contents for K30 ES

Reviews:

Related manuals for K30 ES

Brands by name

Popular brands