9. Service
Always pull out the main plug from the socket
before carrying out maintenance or cleaning
work on the grinder!
Do not let any foreign objects fall into the grind-
ing mechanism!
Inspect the grinder regularly for damage, par-
ticularly to the electrical cable, plug, etc.
Any required repairs may only be conducted by
authorized specialist personnel. For this reason,
please contact a customer service repair facility,
your dealer or us directly as the manufacturer.
Observe the safety instructions under 1.2!
9.1 Exchange of the built-in grinder EK11
In case of a defect in the built-in grinder it can easily be ex-
changed in one piece. Service hours can be minimised and the
grinder is quickly ready for operation.
9.1.1
Close the hopper slide, grind all remaining coffee beans out
of the discs, loosen the safety screw (pos.2) and take off the hop-
per.
G A S T R O N O M I E M Ü H L E N | H O R E C A G R I N D E R
15
9.1.2
Switch off the grinder and pull the mains plug. Place the
grinder on its side and unscrew the fastening screws. Store the
screws and washers in a safe place. Re-position the grinder on its
rubber feet.
9.1.3
Remove the lid’s safety screw (pos. 4) and turn the lid to the
coarsest setting. Lift off the lid from the grinder.
9.1.4
Release the motor’s plug-in connector. Carefully pull the in-
tegrated grinder out of the casing.
9.1.5
Carefully vacuum out the grinder casing and the integrat-
ed grinder’s spout and clean with a brush.
Do not damage any
cables!
1
2
3
