Fault
Cause
Remedy
The grinder’s
dispensing
accuracy is
decreasing.
•
The ambient
conditions
have changed,
e.g. the instal-
lation location.
t
The scales must be calibrated
(see chapter on “Calibrating the
load cell“).
•
The calibration
interval
has been
exceeded.
t
The scales must be calibrated
(see chapter on “Calibrating the
load cell“).
•
The spout is
clogged.
Too much
ground coffee
has been
deposited in
solid form
inside the
grinder.
t
Remove the spout or use a brush to
clean the spout from the outside with
the grinder switched off.
Release the grinding degree
adjustment lock and set the grinding
degree to “10".
Start the grinding process.
The grinder will clear itself.
Then set the desired grinding degree
setting to the desired grinding degree
during operation.
•
The grinder
spout is
damaged.
t
Contact your service partner
(see chapter on “Maintenance and
service”).
•
The flapper
is dirty.
t
Clean the flapper (see chapter on
“Cleaning the flapper“).
•
The flapper
is faulty.
t
Change the flapper (see chapter on
“Changing the flapper“).
The bean
hopper
cannot be
attached.
•
There are
beans in the
bean hopper
intake.
t
Remove the beans from the bean
hopper intake.
43
E80 GbW | F80 GbW | EN
ESPRESSO GRINDER| FILTER COFFEE GRINDER
42
Summary of Contents for E80 GbW
