Mahlkonig E80 GbW, Operating Manual, Page: 22 / 47

Operation
NOTE!
Danger of overheating!
Exceeding the maximum permissible operating cycle can cause the
grinder to overheat.
– Do not exceed the maximum operating cycle (see chapter on
“Technical data”).
– Observe the recommended pause when the maximum permis -
sible operating cycle is reached (see chapter
“
Technical data
”
).
• The grinder has a thermal overcurrent circuit breaker that
interrupts the grinder's circuit in the event of an electrical
overload.
To start the grinder again, set the On/Off switch
(5)
to switch
position
0
(Off).
Then press in the release button
(6)
.
You can now switch the grinder on again by setting the
On/Off switch to switch position
I
and start up the grinder
(see the chapter on “Troubleshooting”).
• The grinder also has a motor protector, which switches off
the grinder when the motor becomes too hot.
As soon as the motor has cooled down, the grinder can be put
into operation again (see the chapter on “Troubleshooting”).
NOTE!
Risk of damage!
The operator has no influence on the thermal overcurrent circuit
breaker. If the circuit breaker trips several times, it is essential to
consult an authorised service partner, as the motor winding may be
damaged.
E80 GbW | F80 GbW | EN ESPRESSO GRINDER| FILTER COFFEE GRINDER
22