The maximum diameter of the brew basket to
fit the FCG 2.0 is 200 mm (7.87 inch).
The maximum height of the brew basket to fit
the FCG 2.0 is 150 mm (5,9 inch).
2)
6.4 Alternatively: Place the French Press brewer
The grinder may also be used to grind directly into a “3 Cup
French Press”. Place the French Press on the marked spot on the
base right under the spout.
6.5 Choose the unit of dosing
The display shows the current dosing setting (unit). The coffee
can be dosed either by CUPS or by LITERS. The active selection is
shown in the display by the dot between the figures.
press
for 3s
Dosing by liters
Dosing by cups
To change from CUPS to LITERS and vice versa press the START
button for 3 seconds.
2)
To make off-size brew baskets fit the FCG 2.0 contact the manufacturer for
adaptations.
Protect your device with separate pre-fuses (not
included in the scope of delivery) according to
the information provided under Point 2 “Techni-
cal data”.
Make sure that the pre-fuse is not overloaded by
other devices (e.g. fan heaters, deep freezers).
Check whether the main voltage and frequen-
cy correspond to the information on the rating
plate.
6. Operation
6.1 Fill the hopper with coffee beans
Lift the lid (pos.1) and fill whole roasted coffee beans into the
hopper. Close the lid.
6.2 Switch on the grinder
Turn on the grinder by pressing the ON/OFF switch (pos. 8).
6.3 Insert the brew basket
The grinder can be used for various brew basket sizes, i.e. all
popular 1.8l pourover filter coffee machines.
Slide the brew basket between the movable brackets. It should
hang evenly under the spout of the grinder.
G A S T R O N O M I E M Ü H L E N | H O R E C A G R I N D E R
9
