background image

S P E Z I A L M Ü H L E N   |   S P E C I A L   G R I N D E R

2. Technical Data

Description 

   Costa 

Rica

     (MR32 

K)

Voltage / Frequency / Phases 

 

220-240V / 50/60Hz

Motor rotations 

50 

Hz 

    1400 

U/min.

60 

Hz 

    1700 

U/min.

Sound emission 
Idle 

operation 

   65 

dB

Grinding*    85 

dB

Pre-fuse (building)  

 

 

16A-slow

Current overload protection
220 - 240 V  

 

 

 

5 A T

Permissible max. operating 
time of the grinder 

 

 

40 min.

Dimensions in mm 

 

 

W 300, H 620, D 560

Net weight 

 

 

 

32 kg (70.5 lbs)

Hopper capacity*   

 

 

appr. 500 g (1.1 lbs)

* values depend on grinding material

(Please ask the manufacturer or dealer for technical data on other voltages and frequencies.)

1.3 Purpose of Use

The grinder you have purchased, “Costa Rica (MR32K)”, is only allowed to 
be used to grind the material for which the grinder has been designed. 
Never use the grinder to grind any other products or objects. 

As there are a number of grater baskets for the grater, only grate prod-
ucts for which the grater baskets have been designed. There are grater 
baskets for all types of nuts and cheeses. 

1.4 User Requirements

No special requirements are specifi ed for the users of this grinder/grater. 
It is, however, assumed that this manual of operating instructions has 
been carefully read and understood and that all instructions provided in 
this manual will be observed. In addition, working with the device on a 
safety-conscious basis is also expected.

5

Summary of Contents for Costa Rica

















Reviews: