Mahlers Wasp G1, Instruction Manual

Page: 29 / 40

Weekly
Location Measure Remarks
Air spring Inspect Normally 4.0 bar.
Measure with pressure
gauge.
Every 50 hours
Location Measure Remarks
Hydraulic oil level Check level Sight glass in oil tank
Grease nipple for tow hitch
pivots Lubricate Multifak EP2
Sweeper roller ball bearings Lubricate Multifak EP2
Every 100 hours
Location Measure Remarks
Pump gearbox Check level Sight glass in gearbox
Every 200 hours
Location Measure Remarks
Upper and lower pivots for
hydraulic cylinders Lubricate Multifak EP2
Every 400 hours
Location Measure Remarks
Oil filter Replace
Every 1200 hours
Location Measure Remarks
Breather filter Replace
Hydraulic oil** Replace Rando HDZ 32
Twice yearly
Location Measure Remarks
All tow hitch components Inspect Replace damaged parts or
repair by skilled
personnel.
* Clean the machine regularly, taking special care to wash the
inside of the hopper. If using a high-pressure washer, take care to
avoid spraying the hydraulic valve electrical connections, junction
boxes, connectors and breather filter.
** On delivery, the hydraulic system is normally filled with Texaco
Rando HDZ 32 mineral oil unless otherwise specified.