en | 6 | CAJ-25LP
Responsibilities
4. Responsibilities
4.1
Receiving inspection
Before attempting to operate this equipment, thoroughly
read and understand this manual. Completely remove all
tape and packaging. Inspect the equipment immediately
upon delivery. If shipping damage is evident, inform the
delivering
carrier
immediately
and
contact
the
manufacturer using the contact information on the back
cover of this manual.
4.2
Owner and/or operator responsibilities
The owner of this equipment must read these instructions
and maintain them for future reference and for instructing
any other users of the equipment. The owner is
responsible for keeping all warning labels and instruction
manuals legible and intact. Replacement labels and
literature are available from the manufacturer. The owner
must never authorize or allow anyone to use this
equipment until the operator has read and understood the
information in this manual and on the accompanying
labeling on the equipment itself.
If this equipment is being used in an occupational setting
(or workplace), the employer should ensure that all
personnel working with and around the equipment know of
the risks associated with its use. Personnel involved in the
use and operation of this equipment shall be careful,
competent, trained, and qualified in the safe operation of
the equipment and its proper use when servicing motor
vehicles and their components. Safety information
provided with this equipment should be emphasized by the
employer and understood by each employee. The
employer must make this manual available to all personnel
using this equipment and all personnel must read and
understand the contents of this manual. If the operator is
not fluent in English, the man
ufacturer’s instructions and
warnings shall be read to and discussed with the operator
in the operator’s native language by the employer, making
sure that the operator comprehends its contents and
observes the proper procedures for use of this equipment.
5. Specifications
5.1
CAJ-25LP
Model CAJ-25LP
US units
Metric units
Maximum capacity
50,000 lbs
22680 kg
Required air pressure
90-200 psi
6.2-13.8 bar
Minimum start height
8-
3
/
4
in
22.2 cm
Minimum start height (w/ short
lift pad extension socket)
11 in
27.9 cm
Minimum start height (w/ tall lift
pad extension socket)
13-
1
/
2
in
34.3 cm
Minimum start height (w/ short
and tall lift pad extension
sockets)
15-
7
/
8
in
40.32 cm
Maximum lift height
13-
13
/
16
in
35.1 cm
Maximum lift height (w/ short
lift pad extension socket)
16-
1
/
8
in
41 cm
Maximum lift height (w/ tall lift
pad extension socket)
18-
5
/
8
in
47.3 cm
Maximum lift height (w/ short
and tall lift pad extension
sockets)
21 in
53.3 cm
Stroke
5-
1
/
8
in
13.0 cm
Lift pad diameter
3-
1
/
2
in
8.89 cm
Weight
120 lb
54.4 kg
