128
After Driving
MAHINDRA GOA
4
Tightening the nuts
Lower the vehicle by turning the jack
handle anti-clockwise. Tighten the nuts
one by one, a little each time, until all the
nuts are fully tight. Use only the wheel nut
wrench and turn it clockwise to tighten
the nuts. Do not use other tools or any
additional leverage other than your hands,
such as hammer, pipe or your foot.
Never apply oil or grease on the bolts or
nuts. Doing so may resulting in over-
tightening
Warning
Improperly or loosely tightened
wheel nuts are dangerous. The wheel
could wobble or come off. This could
result in loss of vehicle control and
cause a serious accident. Always make
sure all the wheel nuts are properly
/ securely tightened to the specified
torque.
When lowering the vehicle, do not
put any part of your body under the
vehicle
Caution
Never use oil or grease on the
bolts or nuts. The nuts may loose and the
wheels may fall off, which may leads to an
accident.
Reinstalling the Wheel Cover
Position the wheel cover so that it aligns
with the valve stem. Tap the outer edge of
the wheel cover with the heel of the hand
to snap it into place.
Caution
Be careful in handling the wheel
cover to avoid personal injury.
