14
BA491201-en
Pos: 61 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/H/Überschr ift 1.1: Hubsäulen aufs tellen, anm elden und verbinden @ 6\m od_1178277124484_ 75.docx @ 91204 @ 2 @ 1
3.5
Positioning, Logging in and Interconnecting the Columns
Pos: 62 / Technische Dokumentation/Hebetechnik/49 Radgreifer-Hebebühnen/1201 MCL/BA/I nhalt: 4912 Hubsäulen aufs tellen, anm elden und verbinden @ 6\m od_1178277345406_ 75.docx @ 91217 @ @ 1
1
Push the support forks completely under the wheels or lift points of the vehicle to be raised.
Use the lift on a hard, level surface only.
2
Connect all columns to be used with the power supply.
It is possible to plug in either each column separately or a combination of not more than four
columns.
3 Turn the main switch to position 1.
LED "Auto" flashes.
4 Select the transmission channel. All columns
belonging to the same unit must be set to
the same channel.
5 Confirm using the operating mode button.
LED "Auto" lights up permanently.
6 Repeat the procedure for all columns.
Number of columns within the unit is displayed.
Before closing the unit check the number of logged-in columns. After closing verify that it
corresponds with the number of columns appearing on the display.
7 Once all columns are logged in, close the unit using button
"0/1".
LED "Column unit" lights up, lift is ready for operation.
Pos: 63 /----- Format-----/MAN UELLER UM BRUCH Seitenumbruch @ 0\m od_1134403577687_ 0.docx @ 1277 @ @ 1
