19
BA492401-en
Pos: 70 /Produktfamilien/Alle Geräte/Überschriften/Überschriften 1.1/H/Überschrift 1.1: Heben und Senken @ 6\mod_1178521944593_75.docx @ 91237 @ 2 @ 1
3.8
Raising and Lowering
Pos: 71 /Produktfamilien/Hebetechnik/COLUMNLIFT/491201 MCL/BA/Inhalt: 4912 Heben und Senken MCL/RGB/RGA_12pt @ 26\mod_1325583908336_75.docx @ 1145341 @ @ 1
WARNING
When operating the lift in Group or Single mode, make
sure the vehicle is not tilted. Otherwise the vehicle may
fall off the lift!
•
Before operating the lift, check that the number of columns appearing on the
display corresponds to the number of columns actually logged in.
•
All columns belonging to the same unit must be set to the same channel.
•
If the unit is opened there may be interference problems with other transmission
channels.
1 Press "Raise" or "Lower" button.
Lift stops once button is released or end position is
reached.
Pos: 72 /Produktfamilien/Alle Geräte/Überschriften/Überschriften 1.1/A/Überschrift 1.1: Ausschalten @ 15\mod_1245314486547_75.docx @ 390887 @ 2 @ 1
3.9
Shutdown
Pos: 73 /Produktfamilien/Hebetechnik/COLUMNLIFT/491201 MCL/BA/Inhalt: 4912 Ausschalten MCL/RGB/RGA_12pt @ 26\mod_1325584062028_75.docx @ 1145373 @ @ 1
1 Before shutting down the lift, open
the column unit using button "0/1".
"Column unit" LED goes off.
2 Turn main switch to position 0.
Pos: 74 /-----Format-----/MANUELLER UMBRUCH Seitenumbruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1
