14
BA551501-en
1
•
Completely remove the packaging from jack and carriage.
IMPORTANT: The carriage is matched to the pit specified in the order.
Use in other pits is only permitted after consultation with the manufac-
turer.
•
For reasons of work safety, the jack must be disconnected from the car-
riage during the installation process. To do this, loosen all four hex
screws (A) as marked in Fig. 1. When using the telescopic jack, make
sure that the cover is secured.
•
Using a suitable hoist, lift the jack out in the upright position as it sits in
the carriage and place it on level ground.
A
A
A
A
1
