background image

- 1 -

OWNER'S MANUAL

WORKING LOAD LIMIT 2000KG

GARAGE JACK

Model No: G2000SA

THIS JACK CONFORMS TO MANDATORY 

STANDARD AS 2615:2016

Safe Instructions

Operation

Specifications

Maintenance

CAUTION:
Carefully Read Instructions and Procedures for Safe Operations

Imported by

SHINN FU AUSTRALIA PTY. LTD.

15 Viewtech Place, Rowville 3178 VIC Australia

WARNING: THE JACK MUST BE USED ONLY ON HARD 

LEVEL SURFACES AND BE FREE TO ROLL DURING 

LIFTING AND LOWERING. DO NOT GET UNDER A 

VEHICLE THAT IS SUPPORTED ONLY BY A TROLLEY 

JACK - USE SUPPORT STANDS.

Summary of Contents for G2000SA

Page 1: ...tions Maintenance CAUTION Carefully Read Instructions and Procedures for Safe Operations Imported by SHINN FU AUSTRALIA PTY LTD 15 Viewtech Place Rowville 3178 VIC Australia WARNING THE JACK MUST BE USED ONLY ON HARD LEVEL SURFACES AND BE FREE TO ROLL DURING LIFTING AND LOWERING DO NOT GET UNDER A VEHICLE THAT IS SUPPORTED ONLY BY A TROLLEY JACK USE SUPPORT STANDS ...

Page 2: ...hould be supported on suitably rated vehicle support stands 4 Use the hydraulic trolley jack on a hard level surface and ensure it is free to roll during lifting and lowering 5 No person should remain in a vehicle that is being lifted 6 Chock the unlifted wheels of the vehicle 7 Centrally locate the load on the head cap 8 Support the vehicle on suitably rated vehicle support stands and remove the ...

Page 3: ...t Wheel Rear Castor Release Valve Gear Handle Assembly Hydraulic Power Unit Saddle Handle Fork 1 Raise load sufficiently to remove support devices then slowly turn handle counterclockwise until load begins to lower Carefully control the rate of descent and avoid shock load created by opening and closing valve quickly This may result in overloading hydraulic circuit causing damage to jack and perso...

Page 4: ... back and the jack is ready for use Add lubricating oil to all moving parts as needed Check ram and pump plunger every few months for any signs of rust or corrosion Clean as needed by wiping with oily cloth When not in use ALWAYS store jack with saddle and pump plunger lowered all the way down POSSIBLE PROBLEMS POSSIBLE CAUSES Jack will not lift load Jack will lift load but will not hold Jack will...

Reviews: