17
BA364501-en
3.4
Transport and Handling
The transport and handling of the lift is only permitted using the original transport
racks. The pick-up points shown below must be used for the loading and unloading of
the packaged lift.
IMPORTANT:
Strapping of the columns is not permitted!
The dimensions and centre of gravity of the packaged lift are shown in the section
“Packaging Information”.
Lift in transport rack on pallet, pick-up points marked
3.5
Storage
The packages must be stored in a covered location and protected from direct sunlight.
They must be stored at low humidity and at a temperature between 0 °C and +40 °C.
The lifts may only be stacked in the original transport racks, there is a three-lift
maximum stacking height (see also section “Transport and Handling”).
Packaging waste must be disposed of in accordance with applicable environmental
regulations.
