8
BA364501-en
The lift drive consists of an electric motor with an electric release brake, which moves
a Tr 40x6 spindle via a belt drive. A lifting or lowering movement is thereby triggered
via the anti-rotation secured nut in the lifting carriage depending on the direction of
rotation.
The intuitive control unit is located on the back of one, or both, column(s) depending
on the design. Power is supplied via a connector plug at the upper end of the main
column. The unit enables all functions for the safe operation of the lift and displays all
operating states and errors that occur.
Depending on the situation, a signal sound indicates errors, incorrect operation or the
reaching of the CE-defined stop height during the lowering process.
Proximity switches detect end positions, asynchronism and nut breakage.
The relevant direction button light turns off to indicate when an end position has been
reached.
2.3.2
Intended Use
This lift is exclusively intended for the safe lifting and lowering of passenger cars
and commercial vehicles up to a total weight of 3.5 t within the scope of mainte-
nance and repair work.
In compliance with the load distribution regulations of DIN EN 1493, the permitted
load capacity on the identification plate must not be exceeded. Only vehicles which
are suitable for the lifting equipment due to their shape and the positioning of their
lifting points may be lifted.
The lifting of other vehicles and loads is not permitted.
Carrying of passengers is not permitted.
The lift may not be modified without express written permission from the manufac-
turer. Non-compliance invalidates the declaration of conformity.
