Maguire Products WEIGH SCALE BLENDER WSB-100 Series, Installation Operation & Maintenance

Page: 38 / 148

M A G U I R E P R O D U C T S , I N C .
38
W E I G H S C A L E B L E N D E R

KEYSTROKE SEQUENCE for these or other SPECIAL FEATURES
Making Changes to Parameters - Keypad Sequence:
Switch the STOP END OF CYCLE switch DOWN :
Turn
POWER ON . Wait 5 seconds, until display says WAITING
Press
Display will say: ENTER PASSWORD
Press
Display will say: PROGRAM
This is the Program Mode
To alter a PARAMETER:
Press
Press repeatedly until the parameter you want is displayed.
If you accidentally pass it, use the * key to back up. With
the proper parameter displayed, enter the NEW number.
Enter 5 digits; use leading zeros if necessary. For correct
entries, follow specific directions given in the PARAMETER
section.
Press Display will say: PROGRAM
Press Display will say: SAVE USER SETTINGS
This saves the changes made
Press Display will say: WAITING when settings are complete.
Making Changes to Functions - Keypad Sequence:
Press Display will say: ENTER PASSWORD
Press Display will say: PROGRAM
This is the PROGRAM MODE
Press Display will say: INSTRUCTION [ _ _ ]
Press XX (2-digit code) Enter the 2-digit code. For correct entries, follow specific
directions given in the KEYPAD section, STAR
FUNCTIONS.
Press Display will say: PROGRAM
Press Display will say: SAVE USER SETTINGS
This saves the changes made
Press Display will say: WAITING when settings are complete.
Shortcut to the Component Parameters
– If you are making adjustments to the
component parameters, you can skip past the Standard parameter list by doing the
following: After pressing *22222, then pressing the PARA key, press the SET key to jump
directly to the component parameters. Toggle forward through the component
parameters by continuing to press the SET key. Press the VIEW key to move backwards
through the component parameters.