9
SECTION 3. OPERATION
This section contains check/ card reading procedures, the LED indicator states and cleaning
procedures.
CHECK READING PROCEDURE
1.
Orient the check so the MICR line is down and the printed side faces the center of the
ImageSafe Scanner as indicated in Figure 3-1. For more information about the MICR
line refer to Appendix A.
2.
Place the check so the leading edge is in the open slot. Slide the check forward.
3.
When the ImageSafe Scanner detects the presence of the check, the motor will turn
on. At this time press the check forward until the unit grabs the check. When this
happens, release the check. The check will then be transported around the check path
and will exit through the other side.
4.
After the check is read, the ImageSafe Scanner will transmit the data as specified by
its configuration parameters.
5.
Remove the check.
Figure 3-1. Check Orientation - Insertion
Summary of Contents for IMAGESAFE
