Magnum V-BOX PV Series, Installation And Operating Instruction Manual

Page: 4 / 48

4
ITEM PART NUMBER QTY. DESCRIPTION
1 62602 4 Ratchet/Strap
2 62807 4 Bolt, 1/2” Eye
3 20307 4 Locknut, 1/2-13 Esna ZP
4 62604 4 Nut, 1/2-13 Hex ZP
5 62605 8 Flatwasher, 3/4"
OPTIONAL HOLD-DOWN KIT
Part No. (62562)
INSTALLATION INSTRUCTIONS
READ ALL THE INSTALLATION INSTRUCTIONS BEFORE STARTING
Before starting, verify that this mounting is acceptable to the vehicle manufacturer.
Attach the hold down at each corner of hopper as shown. Locate and drill four .531
(17/32”) diameter holes for eye-bolts in the truck bed (position may vary from that shown). Straps must be
positioned at opposing angles so that spreader cannot slide forward or rearward. Mount eye-bolts as
shown, with locknuts and flatwashers on the bottom side. Assemble ratchet/strap to eye-bolts. Tighten
hold downs evenly. Do not over tighten damage will result to the spreader or the truck.
CAUTION
1
2
4
5