MCC-35
23
(black area) should be in the middle and near the leading edge. The Mark
register only work if it is in right size and right place.
1. Reg cut mark (Y) distance should be between 3~15 mm from leading edge.
2. The black mark itself should be more than 3*12 (L>=12mm, W>=3mm)
3. All area above the mark should be blank, because other color may affect the
mark reader.
4. The register mark reference point is the top edge of the mark.
1
5.3.5.2 How to use a Register Mark
？
1. Press Mode Key
for 3 times to enter Register Mark Screen. Input
value 1 and press Enter to confirm. Then turn to the register Distance Setting
Screen.
3. Register Mark Setting. Input the distance value of mark top edge to the
Feeding
L
W
Y
Summary of Contents for MCC-35
