36
In order to ensure the quality of network communication, the main thermostat must be installed in the
living room, in the same area as the router. Please pay attention to distinguish the main and slave
thermostats, the main thermostat and wiring control centre are in a package, named H64-MT WiFi
1. Pull back plate to open the thermostat (magnet adsorption)
10
Thermostat quick installation
Mounting thermostats
To ensure the quality of the Internet connection, the master thermostat should be installed in an area
with good WiFi reception. Be sure to distinguish the master thermostat from the slave thermostat. The
master thermostat is supplied with the control unit and is called H64-MT WiFi.
2. Wiring (It is recommended to use 0.75-1.5mm wire)
Press the snap-gauge
snap-gauge
Insert the wires into slots
11
Connect NTC10K
Power:12V wire from wiring center
Connecting
NTC10K
Power supply
Control unit: 12V
Insert the cables into the slots
Terminal
connection
1. Pull the back plate to open the thermostat
(magnetic).
2. Wiring (Recommended 0.75-1.5 mm)
Summary of Contents for H64
Page 2: ...2 ...
Page 28: ...28 ...
Page 29: ...29 H64 wired control system INSTALLATION INSTRUCTIONS USER MANUAL ...
Page 30: ...30 ...
