32
33
Assembly and installation H64-CC Control unit
2. Opening the control unit
Remove the back plate by inserting a small
screwdriver into the slot at the bottom. With a
lever movement, it will come off.
Wiring control centre installation
In order to ensure the quality of network communication, the master thermostat must be installed in the
living room, in the same area as the router. Please pay attention to distinguish the master and slave
thermostat during the installation.
The master thermostat is packaged with the wiring control centre and named H64-MT WiFi
1. There is a slit above the wiring control centre. Use a small flat-blade screwdriver to insert it and pry
it out and remove the back plate.
Unplug
The
buckle
Pry off the
back plate
06
Product installation and testing
1. Determine location
Determine the position of the control unit near
the distributor and a grounded power point
(100-240VAC/10A).
You must have the electrical installation
performed by a licensed installer according to
the locally applicable standards.
Summary of Contents for H64
Page 2: ...2 ...
Page 28: ...28 ...
Page 29: ...29 H64 wired control system INSTALLATION INSTRUCTIONS USER MANUAL ...
Page 30: ...30 ...
