Operation
313036H
11
Operation
See Operation manual 312001 for basic information on
sprayer set-up, flushing, and storage.
Trigger Lock
Always engage the trigger lock when you stop spraying
to prevent the gun from being triggered accidentally by
hand or if dropped or bumped.
Pressure Relief Procedure
Follow this Pressure Relief Procedure whenever you
stop spraying and before cleaning, checking, servicing,
or transporting equipment.
1.
Turn power switch OFF and unplug
power cord.
2.
Turn Prime/Spray valve to
PRIME to relieve pressure.
3.
Hold gun firmly to side of pail.
Trigger the gun to relieve pres-
sure.
4.
Engage trigger lock.
NOTE: Leave Prime/Spray valve in the PRIME position
until you are ready to spray again.
If you suspect the spray tip or hose is clogged or that
pressure has not been fully relieved after following the
steps above, VERY SLOWLY loosen tip guard retaining
nut or hose end coupling to relieve pressure gradually,
then loosen completely. Clear hose or tip obstruction.
Read Unclogging Spray Tip instructions in the Sprayer
or Gun Operation manual.
Pressure Control Knob Settings
NOTE: To select function, align symbol on pressure control knob with setting indicator on sprayer.
ti8908a
ti8909a
Trigger Locked
Trigger Unlocked
ti2018a
ti9346a
ti11986a
High Pressure
Spray
Low Pressure
Spray
Prime/
Clean
Rolling
ti5597a
Summary of Contents for 24N808
Page 41: ...Notes 313036H 7 Notes ...
