Technical Data
313034G
33
M
AGNUM
ProLTS 17
M
AGNUM
ProLTS 19
Working pressure range
0-3000 psi
(0-21 MPa, 0-207 bar)
0-3000 psi
(0-21 MPa, 0-207 bar)
Electric motor
5.8A (open frame,
permanent magnet DC)
9.4A (open frame,
permanent magnet DC)
Operating horsepower
3/4
7/8
Maximum delivery (with tip)
0.34 gpm (1.29 lpm)
0.38 gpm (1.44 lpm)
Paint hose
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
1/4 in. x 50 ft
(6.4 mm x 15 m)
Maximum tip hole size
0.017 in. (0.43 mm)
0.019 in. (0.48 mm)
Weight, sprayer only
33 lb (20 kg)
33 lb (20 kg)
Weight, sprayer, hose & gun
36 lb (21kg)
36 lb (21 kg)
Dimensions (Upright):
Length
21.25 in. (54 cm)
21.25 in. (54 cm)
Width
15.25 in. (39 cm)
15.25 in. (39 cm)
Height
36.75 in. (93 cm)
36.75 in. (93 cm)
Dimensions (Folded):
Length
21.25 in (54 cm)
21.25 in. (54 cm)
Width
15.25 in (39 cm)
15.25 in. (39 cm)
Height
30 in. (76 cm)
30 in. (76 cm)
Power cord
16 AWG, 3-wire, 6 ft (1.8 m)
Fluid inlet fitting
3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting
1/4 NPSM external thread
Inlet screen (on suction tube)
35 mesh (450 micron)
Wetted parts, pump & hose
stainless steel, brass, leather, ultra-high molecular weight polyethylene
(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene,
fluroelastomer
Wetted parts, gun
aluminum, brass, carbide, nylon, plated steel, stainless steel,
UHMWPE, zinc
Generator requirement
1500 Watt minimum
Electrical power requirement
120 Vac, 60 Hz, 15A, 1 phase
Storage temperature range
◆❖
-30° to 160°F (-35° to 71°C)
Operating temperature range
✔
40° to 115°F (4° to 46°C)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in
pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
Summary of Contents for 24N808
Page 41: ...Notes 313036H 7 Notes ...
