Magnum 232735, Repair And Parts Manual

Page: 39 / 40

Technical Data
309226M 39
Technical Data
M
AGNUM
dx M
AGNUM
XR5 M
AGNUM
XR7 M
AGNUM
XR9
Working pressure
range 0-2800 psi (0-19 MPa,
0 -193 bar) 0-3000 psi (0-21 MPa,
0-207 bar) 0-3000 psi (0-21 MPa,
0-207 bar) 0-3000 psi (0-21 MPa,
0-207 bar)
Electric motor 6.5 AMP (open frame,
universal) 5.8 AMP (open frame, permanent magnet
DC) 9.4 AMP (open frame,
permanent magnet
DC)
Operating horsepower 3/8 5/8 3/4 7/8
Maximum delivery
(with tip) 0.24 gpm (0.91 lpm) 0.27 gpm (1.02 lpm) 0.31 gpm (1.17 lpm) 0.38 gpm (1.44 lpm)
Paint hose 25 ft (7.6 m) x 3/16 in. 25 ft (7.6 m) x 1/4 in. 50 ft (15.2 m) x 1/4 in. 50 ft (15.2 m) x 1/4 in.
Maximum tip hole size 0.015 in. (0.38 mm) 0.015 in. (0.38 mm) 0.017 in. (0.43 mm) 0.019 in. (0.48 mm)
Weight, sprayer only 15 lb (7 kg) 21 lb (10 kg) 31 lb (14 kg) 35 lb (16 kg)
Weight, sprayer, hose
& gun 18 lb (8 kg) 24 lb (11 kg) 36 lb (17 kg) 40 lb (18 kg)
Dimensions:
Length 17.5 in. (44.5 cm) 13.75 in. (34.9 cm) 19.5 in. (49.5 cm) 19.5 in. (49.5 cm)
Width 18 in. (46 cm) 11 in. (27.9 cm) 17.25 in. (43.8 cm) 19 in. (48.3 cm)
Height 21 in. (53 in.) 19 in. (48.3 cm) 40.75 in. (103.5 cm)*
* Height with folded handle is
26 in. (66 cm)
40 in. (101.6 cm)*
* Height with folded handle is
26 in. (66 cm)
Power cord 16 AWG, 3-wire, 6 ft (1.8 m) 16 AWG, 3-wire, 10 ft
(3.05 m)
Fluid inlet fitting 3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting 1/4 NPSM external thread
Inlet screen on suction
tube Early models - 14 mesh (1300 micron)
Later models - 35 mesh (450 micron)
Wetted parts, pump &
hose stainless steel, brass,
ultra-high molecular
weight polyethylene
(UHMWPE), carbide,
nylon, aluminum, PVC,
polypropylene,
fluroelastomer stainless steel, brass, leather, ultra-high molecular weight
polyethylene (UHMWPE), carbide, nylon, aluminum, PVC,
polypropylene, fluroelastomer
Wetted parts, gun SG1-EF: plated steel, nylon, aluminum,
tungsten carbide, stainless steel, brass,
fluroelastomer SG2/SG3: aluminum, brass, carbide, nylon,
plated steel, stainless steel, UHMWPE, zinc
Generator requirement 1500 Watt minimum
Electrical power
requirement 120VAC, 60 Hz, 1 phase, 15A
Storage temperature
range
◆❖
-30° to 160°F (-35° to 71°C)
Operating temperature
range
✔
40° to 115°F (4° to 46°C)
◆
When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.
❖
Damage to plastic parts may result if impact occurs in low temperature conditions.
✔
Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.