©
2010 Magnum Energy, Inc
.
4
1.0 Introduction
1.
Inverter Status Indicator
- this green LED illuminates to
provide information on the inverter’s operation.
2.
Power Switch
-
momentary pushbutton switch that turns the
inverter on or off.
3.
Negative DC Terminal (black)
- the inverter’s connection to
the negative terminal on the battery bank.
4.
Positive DC Terminal (red)
- the inverter’s connection to the
positive terminal on the battery bank.
5.
Input Circuit Breaker
- this circuit breaker protects the unit’s
internal wiring and pass-thru relay.
6.
Output Circuit Breaker
-
this circuit breaker provides another
layer of overload protection. This is not a branch-circuit rated
breaker. Separate AC output breakers are required on the output.
7.
Mounting Flanges (x4)
- secures the inverter to shelf/wall.
8.
AC Wiring Compartment
- provides access for all AC input
and output connections on the inverter.
Figure 3, Front and Back Side Features
9.
Warning and Information Label
-
provides pertinent
information for safely using the inverter.
10.
REMOTE Port Connection
-
a RJ11 connector that allows an
optional remote control to be connected.
11.
ACCESSORY PORT Connection
-
a RJ11 connector to allow
the Battery Temperature Sensor (BTS) or MM-AE accessories (e.g.,
MM-DCLD) to be connected.
12.
Intake Vent
-
ventilation openings to pull in air to help keep
the inverter cool for peak performance.
13.
Exhaust Vent
-
ventilation openings that allow heated air to
be removed by the internal cooling fan.
14.
Model/Serial Number Label
-
includes model/serial number
and provides speci
fi
cations and information on the inverter and
charger. See the
MM-AE Series
Specifi cations
on page 34 for
more information and the different models available.
10
11
12
F ront S ide
9
B ack S ide
14
13
