USER MANUAL
C
FLEX
TM
PROGRAMMING
TOOL
Page 1
Standalone Operation
Programming Tool & Hardware Kit
The hardware kit consists of a Programming Tool and other accessories:
1. Programming Tool
2. USB 2.0 Cable A-type to Mini B
type (USB)
3. Programming Wire (PR)
4. AC/DC USB power adapter
5. Push-in wire box
Making the Connections
Step 1: Connect the mini-plug end
of Programming Wire (PR) into the
Programming Tool port labeled “DMX/
DA/PR” (DMX/DA functions for future
use).
Step 2: Plug the 2-Pin end of the Programming Wire with the Polarity markings
corresponding to the polarity markings on the Push-in wire box.
Step 3: Plug the mini-USB end of the USB cable into the Programming Tool port
labeled “USB” and connect the other end of the cable to the power adapter.
The controller will automatically power up and be ready for use when the USB
power adapter is plugged in.
Step 4: Connect the LED driver programming leads to the wire box terminals,
yellow lead to “+” and gray lead to “-.” The LED driver is ready to program.
Programming Tool & Hardware Kit
