Magnimage MIG-EC90, User Manual

Page: 8 / 53

4
Safety instructions

The power input voltage range of the product is 100~240V
AC/60HZ,please use the correct power supply accordingly.

When you need to connect or pull out any signal or control cables. Please
confirm that all the power supply cords have been pulled out ahead.

When you need to add hardware device for the machine, make sure all of
the signals and power cables have been pulled out ahead.

Before you operate any hardware, please turn off the machine’s power,
release static electricity from your body by touching the ground surface.

Please use the machine in clean, dry and ventilated environment, do not
use it in the high temperature or humidity environment.

The product is the electronic product; please stay away from the fire,
water and of which is inflammable and blast, dangerous.

This product is with high pressure components, please do not open the
case or repair the equipment by yourself.

As there is exceptional condition with smoke, ill-smelling, please turn off
the switch at once and contact with the dealers.
Specification
Specification
Input power supply 100～240VAC，50/60Hz
Power consumption 120W
Overall dimension(L×W×H) 600×456.4×145.8 Unit mm(L×W×H)
Net Weight 13.5Kg