045-00-24_A M24 MAINTENANCE SCHEDULE
Issue A
Page 29
6.4.6
Engine:
Task
No.
Task Description
Task
Nature
Task
Interval
Date
Certifying
Person
42
Undertake engine maintenance in accordance with the appropriate
Rotax maintenance manual and worksheet for the Rotax 914UL
engine.
Fuel Filter
•
Replace the fuel filter
CHK
See ROTAX
service
instructions
43
Lubricate throttle and choke levers and control cables and check for
free movement.
INSP
100 FH/
12 Months
6.4.7
Rotors:
44
Check for wear in teeter bearings. The bearings should show no more
than 0.25mm (0.010”) diameter change/radial play around teeter bolt.
INSP
100 FH/
12 Months
45
Check the teeter bolt for wear and replace if necessary. The bolt
should show no more than 0.25mm (0.010”) diameter change/radial
play around teeter bolt.
INSP
100 FH/
12 Months
46
Check rotor head for smooth running. Investigate and repair/refurbish
if there are any signs of roughness. (Note: Repair and refurbishment
of the rotor head should only be undertaken by technicians approved
by Magni Gyro Srl).
INSP
100 FH/
12 Months
47
Ensure that whilst the nuts are tight and secured with pins, both the
roll and pitch axis pivot bolts are allowed full and free movement.
Clean and re-lubricate with grease.
INSP
100 FH/
12 Months
48
Ensure rotor head pivot block is secure and wire locked.
INSP
100 FH/
12 Months
