045-00-24_A M24 MAINTENANCE SCHEDULE
Issue A
Page 26
26
Check operation of brake levers (including passenger side if fitted) and
condition of cables. Check should include parking brake lock is
satisfactory to hold brakes at fast idle setting on engine.
OP/C
100 FH/
12 Months
Task
No.
Task Description
Task
Nature
Task
Interval
Date
Certifying
Person
27
Check full and free movement of throttle levers (including passenger
side if fitted), check cables. Check security of whole brake/throttle
assembly attachments to nacelle.
OP/C
100 FH/
12 Months
28
Check throttle lever action, through waste-gate for turbo charger to
maximum 115%.
OP/C
100 FH/
12 Months
29
Inspect the lower control fork for rust/cracks – use an inspection
mirror and an appropriate light source to check all of the welded
joints. ANY signs of cracking must be followed by full NDT testing
(procedure as specified in ASTM E1417-05e1) and report to Magni
Gyro Srl. Check bearings and lubricate rose-joints.
INSP
100 FH/
12 Months
30
Check condition of push-rods and including intermediate pivot station,
ensuring that pivot bolt is secured and locked. Check for any excessive
movement between bolt rose-joint and bracket. Lubricate rose-joints.
Check condition of upper part of control system to rotor head for rust-
bowing. Replace if necessary.
INSP
100 FH/
12 Months
31
Ensure full and free movement of both cyclic control sticks and
synchronised movement. Check for play, one with the other. Inspect
all pivot points at base of sticks; check push-rods of keel mounted
control system back to lower control fork. Check carefully for bearing
‘slap’.
INSP
100 FH/
12 Months
32
Check full and free movements of trim system. Lubricate inner cable
with light oil (WD40 or similar).
INSP
100 FH/
12 Months
