19
58-645 Pulsar® Model R86 Non-Contact Radar Transmitter – PROFIBUS PA Output
3.4 Model R86 Menu: Step-By-Step Procedure
The following tables provide a complete explanation of the
software menus displayed by the PULSAR transmitter. The
menu layout is similar between the local Keypad/LCD
interface, the DD, and the DTM.
Use these tables as a step-by-step guide to configure the
transmitter based on the desired measurement type from the
following selections:
• Level Only
• Level & Volume
• Flow
HOME SCREEN
The Home Screen consists of a “slide show” sequence of
Measured Values screens which are rotated at 2-second
intervals. Each Home Measured Value screen can present up
to four information items:
• Physical Device Tag
•
Measured Value
Label, Numerical Value, Units
•
Status
Will be displayed as text
•
Bar Graph
(shown in %)
Bar graph is only displayed on AI_OUT screens shown in
% based on PV scale configuration.
The Home Screen presentation can be customized by view-
ing or hiding some of these items. See DISPLAY CONFIG
under the DEVICE SETUP menu in Section 3.5 —
Configuration Menu.
At left is an example of a Home Screen for a Model R86
configured for a Level Only application.
Home Screen
Up
Down
Back
Enter