magnetic
®
...einfach besser
Bypass main return flow - main return flow
IInstallation option for systems with circulating impurities
and high oxygen intake in several floor heating circuits.
Bypass buffer
Installation directly at the buffer tank. This installation
option allows the effective treatment of the largest possible
volume of water and prevents impurities being deposited in
the buffer tank.
Bypass main return flow before buffer
Installation in main return flow before the buffer
tanks, if oxygenation is likely or circulating impu-
rities are present.
Anodenstrom
Anodenstrom
Anodenstrom
Notes on bypass installation
The HWR must be installed in a bypass, which is why one
should ideally pay attention to the following points:
• Keep the supply lines as short as possible
• Spacer between inlet and outlet ~500 mm
• Supply line = nominal diameter of main line or 1”
• Connection from below with immersion pipe
• Connection from above or attached laterally
• Connection from below or laterally in case of large quantity
of circulating impurities