Add on the end wall. in the centre piece. There are two identical
pieces in the kit. Use either. Orientate the part with the etching on top
and so it aligns with the etched detail. Glue it in place checking that
all the edges match.
We now add on the front and rear outer walls. These are plain
rectangular pieces with no etching. They are both the same. Glue
them on with the ends flush as shown. The top edge forms a lip to
take the lower window edges.
Summary of Contents for 013
