![background image](http://html1.mh-extra.com/html/magnetek/flex-m-series/flex-m-series_manual_3584862012.webp)
Enrange Flex M Pre-Engineered Modular Receiver Manual
October 2014
Page 9 of 31
2.4 REMOVAL
1. To remove modules from the rail for service, first ensure all power to the Flex M modules has
been turned off and proper lockout/tagout procedures have been followed.
2. Remove one end rail clamp and un-nest the module that you wish to remove by separating it
from the others on the rail.
3. Use a slotted screwdriver to lift the exposed metal tab/ring on the top of the module. Swing the
module down away from the top tab/ring and unhook from the rail.
4. The PCB from any module can be removed from its housing by pressing in both tabs first (tabs
are on the front and back sides of the housing) and then the top housing and PCB can be
removed from the lower housing (see Figure 3 for details).
Figure 3: PCB Removal
Flex Sys
Summary of Contents for FLEX M Series
