Magnetek Flex EM Manual Download Page 2

Your New Radio Remote

Thank you for your purchase of Magnetek’s Enrange

®

 brand Flex Radio Remote Equipment Control. 

Magnetek has set a whole new standard in radio-remote performance, dependability, and value with this 

unique new line of handheld transmitters. 

 

If your product ever needs modification or service, please contact one of our representatives at the 

following locations: 

 

U.S. Service Information 

 

For questions regarding service or technical information contact: 

1.866.MAG.SERV 

1.866.624.7378 

 

International Service: 

+1.262.783.3500 

 

Magnetek, Inc. 

N49 W13650 Campbell Drive  

Menomonee Falls, WI 53051 

 

Telephone:

 +1.800.288.8178 

Website:

 www.magnetek.com 

E-mail:

   

[email protected] 

 

Fax Numbers: 

Main:

    

+1.800.298.3503 

Sales:

    

+1.262.783.3510 

Service:

 +1.262.783.3508 

 

Canada Service Information: 

4090B Sladeview Crescent 

Mississauga, Ontario 

L5L 5Y5

 

Canada 

Phone: +1.800.792.7253 

Fax: +1.905.828.5707 

+1.416.424.7617 (24/7 Service pager) 

EU Market Contact: 

Brian Preston 

Magnetek (UK) Ltd. 

Unit 3 Bedford Business Centre, Mile Road 

Bedford, MK42 9TW UK 

Phone: +44.1234.349191 

Fax: +44.1234.268955 

 

©2014 MAGNETEK 

 

All rights reserved. This notice applies to all copyrighted materials included with this product, including, 

but not limited to, this manual and software embodied within the product. This manual is intended for the 

sole use of the person(s) to whom it was provided, and any unauthorized distribution of the manual or 

dispersal of its contents is strictly forbidden. This manual may not be reproduced in whole or in part by 

any means whatsoever without the expressed written permission of MAGNETEK. 

Summary of Contents for Flex EM




















Reviews: