Magnetek Flex 12EX2, Instruction Manual

Page: 25 / 56

Flex 12EX2 Standard, AB and Tandem Instruction Manual
November 2017
Page 25 of 56
4.1.9.3 Toggled Pushbutton with LED Indication – Inline Top/Bottom
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) with
LED indications. LED 1 - 4 shown inside the shaded box
illustrates which LED on the transmitter lights up when the
designated pushbutton is pressed.
See Section 4.2.4 on
page 39 for jumper settings.
* PB1…PB12
→
Pushbutton number.
* Normal
→
Normal momentary contact.
* LED 1 - LED 4
→
Pushbutton toggled function with designated LED indication.
Function
Number
Display Type PB1 PB2 PB3 PB4
1 1 Red Normal Normal Normal LED 4
17 1 Green + 7 Reds Normal Normal LED 3 LED 4
18 1 Green + 8 Reds Normal LED 2 LED 3 LED 4
19 1 Green + 9 Reds LED 1 LED 2 LED 3 LED 4
Function
Number
Display Type PB5 PB6 PB7 PB8
5 5 Reds Normal Normal Normal LED 4
20 2 Greens Normal Normal LED 3 LED 4
21 2 1 Red Normal LED 2 LED 3 LED 4
22 2 2 Reds LED 1 LED 2 LED 3 LED 4
Function
Number
Display Type PB9 PB10 PB11 PB12
13 1 Green + 3 Reds Normal Normal Normal LED 4
26 2 6 Reds Normal Normal LED 3 LED 4
27 2 7 Reds Normal LED 2 LED 3 LED 4
28 2 8 Reds LED 1 LED 2 LED 3 LED 4