Enrange MLTX Transmitter Instruction Manual
February 2011
Page 6 of 19
know and follow the local lockout and tagout procedures when servicing radio controlled
equipment
know and follow all applicable operating and maintenance manuals, safety procedures,
regulatory requirements, and industry standards and codes
The operator shall not:
lift or move more than the rated load
operate the material handling equipment if the direction of travel or function engaged
does not agree with what is indicated on the controller
use the crane, hoist or lifting device to lift, support or transport people
lift or carry any loads over people
operate the crane, hoist or lifting device unless all persons, including the operator, are and
remain clear of the supported load and any potential pinch points
operate a crane, hoist or lifting device when the device is not centered over the load
operate a crane, hoist or lifting device if the chain or wire rope is not seated properly in
the sprockets, drum or sheave
operate any damaged or malfunctioning crane, hoist, lifting device or other material
handling equipment
change any settings or controls without authorization and proper training
remove or obscure any warning or safety labels or tags
leave any load unattended while lifted
leave power on the radio controlled equipment when the equipment is not in operation
operate any material handling equipment using a damaged controller because the unit
may be unsafe
operate manual motions with other than manual power
operate radio controlled equipment when low battery indicator is on