![background image](http://html1.mh-extra.com/html/magnetek/enrange-mltx/enrange-mltx_instruction-manual_3585893013.webp)
Enrange Pre-Engineered MLTX Transmitter Instruction Manual
February 2011
Page 13 of 20
2.13: SW4 POSITION 3 DISABLE TANDEM FOR HOIST AND TROLLEY
(Normally keep turned “OFF”)
For cranes with auxiliary hoists and/or trolleys, turning this switch “ON” disables the transmitter selector
switch “BOTH” position (both function) that selects tandem operation of hoist or trolley.
2.14: SW4 POSITION 4 INVERT CRANE SELECT AUX. OUTPUTS
(Normally keep turned “OFF”)
For cranes that use the select function only, turning this switch “ON” inverts the select function operation
so that the relay closes for the unselected function.
2.15: SW4 POSITIONS 5-7 EXTENDED WIRELESS CONTROL (STANDARD ALL “OFF”)
The Pre-engineered MLTX transmitters are available with extended wireless control configurations. These
options are switch configurable on the transmitter. The eight-position dip switches SW3 and SW4 on the
transmitter can provide all configurations with a single transmitter CPU EPROM for a particular transmitter
style. The programming tables with the transmitter extended wireless control configurations are found in
the appropriate receiver manual. In these sections, if the MLTX is not specifically listed, use the switch
programming guide for the configurations labeled SLTX or JLTX (they are the same).