Magnescale LY71, Instruction And Installation Manual

Page: 61 / 104

LY71
(E)
2-1
w e t y u i o
!0
!1
!4
r !3 !2
q
2. Name and Function of Each Part
2-1. Front Panel
Some controls are used only when the comparator unit (LZ71-KR) (option) is connected.
(See “9-2. Key Operations” for a detailed description of the keys.)
2-1-1. When used without the comparator
No. Name Function
q
ABS lamp Lights on : When displaying absolute value (ABS)
Flashes
: When selecting the axis
Lights off : When displaying incremental value (INC)
w
Counter display A/B : Measurement value display (current value, peak value)
C : Measurement value display (current value, peak value)
However, unlike displays A and B, this is a reference
display, so operations to change numerical value
contents are not allowed.
Shows status with alphabetical letters when making mode settings
(See “7. Alarm Display” when an error occurs.)
e
RESET key Resets incremental value to zero
Switches to INC mode when pressed during ABS display.
r
Axis Select key Selects an axis for the following operations undertaken thereafter
are to the axis
t
P key Used to perform numerical value setting operations (preset)
(lamp lights on when selected)
y
key Used to set the datum point (lamp lights on when selected)
(Datum Point Value/ Used to set the master calibration value when using the master
Master Calibration Value calibration function
Setting key)
u
REF key Used to detect the measuring unit reference point
(lamp lights on when selected)
Used to relocate the master calibration value when using the
master calibration function
i
ABS/INC key Switches between ABS mode and INC mode
o
SETUP key Used to start to make various settings
!0
HOLD key Used when using the hold function (latch/pause) (lamp lights on
when hold function is selected)