Magnescale LY71, Instruction And Installation Manual

Page: 69 / 104

LY71
(E)
3-3
3. Installation and Connection
Connect the supplied ground wire
to ensure that the counter unit is
the same potential as the machine
proper.
Ground wire
(supplied)
Screw down firmly.
Clamp the cable to prevent
the connector from pulling
out.
Provide slack as shown to
ensure that force is not being
applied to the connector.
Counter unit anchor bolt
M4
×
16, 2 pcs. (supplied)
AC adaptor (option)
100 - 240 VAC
±
10 % 50/60 Hz
∗
Get power from the lamp line.
Measuring unit
input
First axis
2
DC output connector
∗∗∗∗∗
I/O connector wiring
You can use AWG26-20 size wires with this terminal block.
Remove 8 mm of the wire outer sheath, insert the wire all the way into the terminal hole while pressing location
A
above the terminal hole with a flatblade precision screwdriver or other fine instrument, and then remove the
screwdriver.
A
See “
*
I/O connector wiring”
below.
Supplied